BG Industry
BG Industry
Shrink Sleeve
Heat‑shrink joint for the straight field joint between two pre‑insulated pipes. Casing‑grade HDPE PE 100, sealed with butyl mastic; higher‑spec versions add shrink film and foam fill. A non‑welded, leak‑testable joint.
KMP-0003
The type-tested constructions
The drawing is Kampek's own. It asserts only what is already published on this site or on the manufacturer's own pages.
- 1Shrink sleeve, casing‑grade HDPE PE 100
- 2Butyl seal at both ends of the sleeve
- 3Foamed in the joint on site
- 4Pre‑fabricated insulation shells instead of foaming
- 5Circumferential electric weld in addition to the butyl seal
Technical data
Technical data
Material
HDPE PE 100
Joint type
Heat‑shrink, butyl‑sealed (non‑welded)
Standard
EN‑489‑1:2019, type‑tested
Diameters
DN 90DN 110DN 125DN 140DN 160DN 180DN 200DN 225DN 250DN 280DN 315DN 355DN 400DN 450
EN‑489‑1:2019 Certifications →
BG Industry
Other products in this family
Heat‑shrink joint for joining two casing pipes of different diameter.
End sleeve for pipeline terminations and pipe ends.
Alongside the basic PE sleeve, BG Industry has two further type‑tested joint constructions.
Request a quote: Shrink Sleeve
Tell us quantity and schedule; we reply on availability and terms within days.